Monday, February 23, 2009

Electric Projection Screen Controls - Add a Wow-factor by Automatically Triggering Your Screen

Your electric projection screen comes with a switch that allows you to operate your screen. But just because that's included, doesn't mean you have to stop there. Because free is great, but what about the WOW-factor of having the screen roll down as soon as you turn on the projector? If you are use to getting out of your chair, you'll love using a trigger. Plus, your friends won't believe their eyes.

So let's go into a little bit more detail.

What does a trigger do?

Triggers allow another device to lower your projection screen - automatically - when you turn on that device. This device can be an amplifier or your projector. The signal is either sent by a wire or by an infra red signal, depending on your trigger type. You normally use a trigger in stead of your standard switch and it's an accessory you buy with your screen. It's not a standard item that you get with your projection screen.

The whole triggering process is automatic, meaning that you need to do nothing else than turn on your projector or amplifier. We'll now look at these triggering devices and the other hardware you need to make this set up work.

What do you need?

- an electric projection screen
- a projector with or without 12V output or amplifier with 12V output
- a trigger box

The triggering system only works with electric projection screens, so that's requirement number one. Then, you need a device that "sets off" the triggering process. That's either your projector (doesn't matter whether it has a 12V output or not) or your amplifier (has to have a 12V output). And lastly, you need a trigger box that translates the signal from your projector or amplifier to a command that tells your projection screen to roll in or out.

What are the possible set-ups?

A. Using your projector as the triggering device

If you use your projector as a triggering device, you have to check whether your projector has a 12V output. This connection should be indicated on the back of the projector. Look for an opening that would take a 2.5 or 3.5mm jack. If you have a 12V output you can use the 12v trigger box. This trigger box is connected by a wire to both the projector and the projection screen. When the projector is turned on, it send a signal through the wire to the box, which translates it into a signal for the projection screen and tells it to roll down. When the projector is switched off, the opposite happens: the screen rolls up.

If your projector does not have a 12V output or you want a wireless (infrared) solution, you can use a power sensing trigger. This trigger consists of two parts: a receiver that's connected to the projection screen and an transmitter that's connected to the projector. When the projector is turned on, the transmitter senses the power consumption of the projector go up. It then sends an infrared signal (wirelessly) to the receiver, which translates it in a signal for the screen to go down. Again when the projector is switched off, a signal is sent to the receiver and the projection screen rolls in.

Keep in mind that when you use an infrared trigger, the transmitter and receiver have to be aligned, as for the IR signal to work, there has to be a free line-of-sight for the transmitter.

B. Using your amplifier as the triggering device

If you want to use your amplifier as the triggering device, you need to have a 12V output on it. That's because the power sensing option would not be practical. Because if you just want to listen to some music, you don't want the projection screen to be lowered automatically.

For the rest, the operation and installation is the same as with projectors that have a 12V output.

Now what are the big benefits of triggering your projection screen in stead of using the standard switch?

1. You won't have to get out of your chair anymore to operate the screen
2. You add a wow-factor to your home theatre that'll really impress your friends.

And what are the drawbacks?

1. There's no way of moving the screen without turning your projector or amplifier on or off. There's normally no need for this, but it is something to keep in mind.
2. It's an option you have to pay for.

So that's it, you now know what a trigger can do for you and what you need. Now go out and make the most of your electric screen.

As an award winning projection screen designer and founder of Beamax projection screens, Otto Tromm knows what matters when you want to get the most from your projection screen.
Otto focuses on an often overlooked aspect: projection screen industrial design. This focus results in projection screens that not only make the most of your projector, but complement your decor.
To find a projector screen that matches your taste, room, budget and projector, go to http://www.beamax.com

Samsung Home Theater Systems

0 comments:

Post a Comment

Love is...
© Department Store Shopping - Template by Blogger Sablonlari - Font by Fontspace